The oil-free and dry compressing small diaphragm pumps from the PB-4 product line can be used for evacuating, conveying and compressing gases and vapours up to a final vacuum of 12 mbar. Four different ranges with further unique models are available within the product line. (Curve presentation of the standard models, per model range).
The PB-4 product line is equipped with a two-cylinder diaphragm pump with linear drive. The staggering or flexing of the diaphragms is prevented here with precisely-straight upwards and downwards movement between the top dead centre and bottom dead centre. This ensures a long service life for the diaphragm. When compared to con-rod pumps with the same performance, diaphragm pumps are a more compact construction due to the omission of the long and rigid con-rods.
The range is further distinguished by quiet operation with proven long service life and maintenance-free operating time.
The materials used, such as aluminium for the gas-conducting components, stainless steel for the valves and piping and VITON (FKM) for the diaphragms, open up a wide range of application options with non-aggressive gases.
|Free flow||12.3 l/min||6.8 l/min||26 l/min||11.5 l/min|
|Final vacuum||100 mbar||12 mbar||85 mbar||12 mbar|
|Final pressure (abs.)||3 bar|
|Hose coupling, suction / pressure||G 1/8"|
|Motor power / r.p.m.||0.07 kW / 1400 min-1||0.09 kW / 2600 min-1|
|Mains requirement / Frequencies||230 V - 50 Hz|
|Noise level||49 dBA bis 53 dBA|
|Permissible gas admission temp.||+ 5 C° bis + 45 C°|
|Permissible ambient temperature||+ 5 C° bis + 45 C°|
|Umgebungs-Temperatur für den Motor||+ 5 C° bis + 45 C°|
|Umgebungs-Temperatur für den Pumpenkopf||+ 5 C° bis + 45 C°|
|Dimensions L x W x H||145 mm x 95 mm x 140 mm|
|Impermeable to gas||1 x 10-3|