The oil-free and dry compressing diaphragm pumps from the PB-8 product line can be used for evacuating, conveying and compressing gases and vapours up to a final vacuum of 2 mbar. Three different ranges with further unique models are available within the product line. (Curve presentation of the standard models, per model range).
The PB-8 product line is equipped with a four-cylinder diaphragm pump with linear drive. The staggering or flexing of the diaphragms is prevented here with precisely-straight upwards and downwards movement between the top dead centre and bottom dead centre. This ensures a long service life for the diaphragm. When compared to con-rod pumps with the same performance, diaphragm pumps are a more compact construction due to the omission of the long and rigid con-rods.
The range is further distinguished by quiet operation with proven long service life and maintenance-free operating time.
The materials used, such as aluminium for the gas-conducting components, stainless steel for the valves and piping and VITON (FKM) for the diaphragms, open up a wide range of application options with non-aggressive gases.
|Free flow||360 l/min||175 l/min||155 l/min|
|Final vacuum||75 mbar||9 mbar||2 mbar|
|Final pressure (abs.)||2 bar|
|Final pressure with KG-Gears||2|
|Hose coupling, suction / pressure||G3/8" / G1/2"|
|Motor power / r.p.m.||0.75 kW / 1400 min-1|
|Mains requirement / Frequencies||230/400 V - 50 Hz|
|Noise level||58 dBA bis 60 dBA|
|Permissible gas admission temp.||+ 5 C° bis + 45 C°|
|Permissible ambient temperature||+ 5 C° bis + 45 C°|
|Permissible ambient temperature motor||+ 5 C° bis + 45 C°|
|Permissible ambient temperature pump||+ 5 C° bis + 45 C°|
|Dimensions L x W x H||467 mm x 338 mm x 338 mm|
|Impermeable to gas||1 x 10-3|