The oil-free and dry compressing heatable diaphragm pumps for sample gas from the PB-32 product line can be used for evacuating, conveying and compressing gases and vapours up to a final vacuum of 104 mbar. Four different ranges with further unique models are available within the product line. (Curve presentation of the standard models, per model range).
The PB-32 product line is equipped with a single-cylinder diaphragm pump with con-rod drive, which carries out an oscillating, tumbling and rocking, upwards and downwards movement of the diaphragm. The diaphragm is fastened to a rigid con-rod and is subjected to a greater or lesser degree of flexing and stretching, depending on the length of the con-rod. The well-thought-out design of the drive offers the user a compact construction and low spatial requirements.
The range is further distinguished by quiet operation with proven long service life and maintenance-free operating time.
The materials used, such as aluminium for the gas-conducting components, stainless steel for the valves and piping and VITON (FKM) for the diaphragms, open up a wide range of application options with non-aggressive gases.
|Free flow||11.2 l/min||3.5 l/min||6.5 l/min||8.5 l/min|
|Final vacuum||104 mbar||400 mbar||220 mbar||190 mbar|
|Final pressure (abs.)||3 bar||1 bar||2.5 bar||3 bar|
|Hose coupling, suction / pressure||G 1/8"|
|Motor power / r.p.m.||0.07 kW / 2600 min-1|
|Mains requirement / Frequencies||230 V - 50 Hz|
|Noise level||49 dBA bis 57 dBA|
|Permissible gas admission temp.||+ 5 C° bis + 200 C° (kurzzeitig + 230 C°)|
|Permissible ambient temperature||+ 5 C° bis + 45 C°|
|Umgebungs-Temperatur für den Motor||+ 5 C° bis + 45 C°|
|Umgebungs-Temperatur für den Pumpenkopf||+ 5 C° bis + 200 C°|
|Dimensions L x W x H||126 mm x 72 mm x 161.5 mm|
|Impermeable to gas||1 x 10-3|